Microwave-assisted extraction and ultrasonic slurry sampling procedures for cobalt determination in geological samples by electrothermal atomic absorption spectroscopy

Slurry sampling is compared to microwave-assisted acid digestion for cobalt determination in soil/sediment samples by electrothermal atomic absorption spectrometry (ETAAS). Furnace temperature programs and appropriate amounts of three chemical modifiers were optimised in order to get the highest signals and good separations between the atomic and background signals. Using nitric acid (0.5% (v/v)) as liquid medium, no chemical modifier was needed. The detection limit, based on integrated absorbance, was 0.04 μg g⁻¹ for digests and slurries. Within-batch precision and analytical recoveries were satisfactory for both procedures. Accuracy was tested by analysing a reference soil and a sediment from IRMM. The methods were further compared employing a set of roadside soils and estuarine sediments. As no significant differences (95% confidence) were found, practical analytical properties were suggested in order to select one of them.     

Determination of vitexin and isovitexin in pigeonpea using ultrasonic extraction followed by LC-MS

A method based on ultrasonic extraction (USE) followed by LC-MS is presented for the determination of vitexin and isovitexin in pigeonpea extracts in this study. The influential parameters of the USE procedure were optimized, and the optimal conditions were as follows: extraction solvent, 60% ethanol solution; liquid/solid ratio 10:1 (mL/g), extraction power, 250 W; temperature, 40-50 degrees C; and three extraction cycles, each cycle 15 min. Validation of the USE method was performed in terms of repeatability and reproducibility. RSDs for extraction yields were lower than 5.85 and 8.09%, respectively. The LOD and LOQ of chromatographic determination were 0.96 and 3.2 ng/mL for vitexin and 0.84 and 2.8 ng/mL for isovitexin. The method was also successfully applied for the determination of vitexin and isovitexin in stems, leaves, and root extracts of pigeonpea. From all these results, we may conclude that the developed method is appropriate for the quality control of pigeonpea and other plant extract products developed from pigeonpea.     

Studies on Acoustic Behavior, Viscosity, and Density of Some Commercial Extractants and Their Molecular Interaction with Diluent, Modifier, and Extractant

Acoustical and viscosity measurements have been made for binary liquid mixtures of commercially available solvent extractants, LIX reagents such as LIX 622 and LIX 860 in benzene, amyl alcohol, and tri-n-butyl phosphate (TBP) at 303.15 K. The measured values of ultrasonic velocity, density, and viscosity have been utilized to compute some acoustic as well as thermodynamic parameters such as intermolecular free length, L _f, isentropic compressibility, _s, molar volume, V, and Gibb's excess free energies of activation of viscous flow, G*^E. These parameters along with the derived values of isentropic compressibility, _s ^E, intermolecular free length, L _f ^E, and molar volume, V ^E, have been utilized for a comparative study of molecular interactions between the components present in different liquid systems. The experimental ultrasonic velocities for aforementioned mixtures have been compared with theoretically estimated velocities using different empirical relations, and the relative merits of these theories and relations have been discussed in terms of percentage variation.     

Ultrasonic degradation of poly(γ-benzyl-l-glutamate), an archetypal highly extended polymer

Ultrasonic degradation provides a convenient means of studying the degradation of macromolecules in transient elongational flows. Of particular interest, because of their being a limiting architectural case, is the degradation of highly extended polymers. A classic example of a polymer with this type of architecture is poly(γ-benzyl-l-glutamate) or PBLG. Here, we monitor results of the ultrasonic degradation of PBLG using size-exclusion chromatography with a multiplicity of physical detectors. Under the given experimental conditions, the limiting molar mass (M_lim) of PBLG was found to be approximately 114,000 g/mol. The fractal dimension of PBLG, which exemplifies the highly extended nature of the macromolecule, was measured by both light scattering and viscometric means. Results from both methods demonstrated a virtual invariance in chain conformation as a function of degradation. Additional support for these observations was provided by the dimensionless ratio of the viscometric and root-mean-square radii.     

Synthesis and kinetic studies of PMMA nanoparticles by non-conventionally initiated emulsion polymerization

The aqueous emulsifier-free emulsion polymerization of methyl methacrylate (MMA) was studied under the catalytic effect of in situ developed bivalent transition metal-EDTA complex with ammonium persulfate (APS, (NH₄)₂S₂O₈) as initiator. Out of these, Cu(II)-EDTA system was selected for detailed kinetic and spectrometric study of polymerization. The apparent activation energy E_a, 34.5 kJ/mol, activation energy of initiator decomposition E_d, 26.9 kJ/mol, energy of propagation E_p, 29 kJ/mol and energy of termination E_t, 16 kJ/mol were reported. The emulsion polymer (PMMA) latex was characterized through the determination of the size and morphology by scanning electron microscopy, the average molecular weight by GPC and viscosity methods and the sound velocity by ultrasonic interferometer. From the kinetic results, the rate of polymerization, R_p at 50 °C was expressed by

     

Antioxidant,anti-lipidemic,hypoglycemic and antiproliferative effects of phenolics from Cortex Mori Radicis

Cortex Mori Radicis (CMR) is enriched in various phenolics, this study aimed to estimate the antioxidant effect, enzyme (lipase, α-amylase, α-glucosidase and acetyl-cholinesterase) inhibition and the anti-proliferative effect of the phenolic compounds in CMR. However, the amount of these compounds obtained from CMR is highly dependent on the processing conditions. In this study, the processing parameters of extracting the phenolics from CMR using ultrasonic technique pooled with high-speed shearing extraction (UTPHSE) were optimized. Subsequently, the phenolics from Cortex Mori Radicis (PCMR) were purified using AB-8 macroporous resin, and their chemical analysis, antioxidant, enzyme inhibition, and antiproliferative activities were studied. Based on our findings, the optimal parameters of UTPHSE were: L/S ratio 25.8:1 (mL/g), voltage 81.0 V, ultrasonic temperature 51.8 ℃ and ultrasonic time 289 s. And under the optimal extraction conditions, the extraction rate of the PCMR was 0.531 ± 0.004%. Compared with PCMR, the contents of “total phenolics, flavonoids, flavonols, flavanols and phenolic acids” increased 2.30, 2.67, 2.59, 3.63 and 2.72 times in the purified phenolics from Cortex Mori Radicis (PPCMR), respectively. In addition, PPCMR depicted significant DPPH, ABTS⁺ and superoxide anion radicals’ scavenging capability, reducing power, ferric ion reducing antioxidant power (FRAP) and remarkable inhibitory activities on “lipase, alpha-amylase, alpha-glucosidase, and the proliferation of HeLa, HepG2 and NCI-H460”. At the same time, the morphological changes of HeLa, HepG2 and NCI-H460 cells suggested that PPCMR could effectively inhibit the proliferation of tumor cells in vitro. Therefore, PPCMR have good potential as natural antioxidants, antilipidemic, hypoglycemic, and antineoplastic agents in functional foods and pharmaceuticals.     

超声酸提取-电感耦合等离子体发射光谱(ICP-OES)法测定复配矿物质中铁锌

建立了复配矿物质中铁、锌的超声酸提取-电感耦合等离子体发射光谱测试方法。方法以10％硝酸为前处理试剂,利用超声辅助提取,优化了仪器检测的条件,消除干扰,并进行方法检出限、精密度和方法准确性等实验。方法的铁、锌检出限分别为1 mg /kg和0.5 mg/kg,线性范围为0.0~5.0 mg/L,相关系数(r)优于0.995。相对标准偏差RSD(%)均在5.0%以下,加标回收率在91.4% ~107.9%,实物加标回收与加标值一致。实验结果表明所建立的方法灵敏度高、简便、快速、准确,适用于复配矿物质中铁、锌的测定。     

Ultrasound-assisted multicomponent synthesis of heterocycles in water – A review

Ultrasound-assisted multicomponent reactions in water are great implements for the development of bioactive compounds. The methodologies for the synthesis of different heterocyclic molecules have acquired enormous attention. Many such techniques are energy-intensive and associated with hazardous chemicals, solvents, expensive work-ups. Low yields and multi-step schemes generate huge organic waste. Hence, researchers thus focussed on benign and eco-friendly techniques to assemble heterocyclic analogs and drug molecules. The ultrasound-assisted synthesis of the target organic moieties frequently facilitates higher product yields than other methodologies. This review is focused on ultrasound-aided multicomponent reactions for synthesizing varied nitrogen-, oxygen-, and sulfur-containing heterocyclic compounds using water as the solvent. The advantages and limitations with respect to yields and reaction conditions are discussed. This evaluation covered the literature reports from 2014 to date.     

I2负载蒙脱土超声法催化Biginelli反应

以芳香醛、乙酰乙酸乙酯及脲为原料,I2负载蒙脱土为催化剂,对超声条件下Biginelli反应进行研究。用单因素法考察溶剂及催化剂对产率的影响,通过正交试验优化温度、超声时间及原料摩尔比。优化反应条件为:反应温度80℃,超声时间5min,芳香醛、乙酰乙酸乙酯和脲的摩尔比为1∶1∶1,催化剂用量为10(mol)%,产率最高可达86.9%。合成的7种3,4-二氢嘧啶-2(1H)-酮衍生物的结构通过红外光谱、核磁共振氢谱和熔点进行表征。     

Sequential ultrasonic extraction of a Chinese coal and characterization of nitrogen‐containing compounds in the extracts using high‐performance liquid chromatography with mass spectrometry

Dongming lignite was sequentially extracted with petroleum ether, carbon disulfide, methanol, acetone, and isometric carbon disulfide/acetone mixed solvent at room temperature to afford extracts 1–5, respectively. High‐performance liquid chromatography coupled with electrospray ionization time‐of‐flight mass spectrometry was used to separate and characterize heteroatomic species in the extracts at molecular level. Molecular mass of compounds in the extracts is mainly distributed from 300 to 800 u, and the relative abundance of compounds with molecular mass over 800 u in the carbon disulfide extract is 135 times of that in the petroleum ether extract. The acetone extract has the highest relative abundance for organonitrogen compounds. Double bond equivalence numbers of detected species indicate that most of the organonitrogen compounds contain N‐heterocyclic aromatic rings, including pyridine, quinoline and pyrrole. Some organonitrogen isomers in Dongming lignite were separated and identified by high‐performance liquid chromatography coupled with electrospray ionization time‐of‐flight mass spectrometry, and the corresponding structural information was proposed.